PT064G Squat Machine — Hack Squat & Leg Press Equipment

PT064G Squat Machine — Wholesale OEM Commercial Plate-Loaded Hack Squat & Leg Press Equipment, Heavy-Duty Bulk Supplier & Custom Strength Machine Manufacturer for Gyms

Technical Sheet and Model Summary

The PT064G is a heavy commercial plate-loaded squat machine. Its assembled footprint is 1650 mm deep, 2000 mm wide and 1600 mm high. The frame weighs 170 kg net. The packaged dimensions are 1900 × 1250 × 1080 mm. The product image shows a black steel base and frame with multiple red round weight plates, red linkage arms and integrated shoulder and hand supports.

Squat equipment occupies the highest-traffic zone in any serious strength facility. It produces the heaviest loads, the most visible effort and the strongest training results on the lower body. The PT064G is designed for that environment. It delivers barbell-level loading without requiring the user to position a bar across the shoulders or stabilize a free rack.

The 2000 mm Width and Why Side Clearance Matters

The 2000 mm width is the controlling dimension of the PT064G. The machine uses a wide carriage and dual-linkage design to support a full squat arc on both sides of the frame.

This width should not be placed against a walking path or in a corridor. The moving components travel through a wide range, and any obstruction on either side creates both a safety risk and an incomplete repetition. The ideal position is against a wall or at the end of a lower-body strength row where both ends of the machine are fully accessible.

The 170 kg Frame and Heavy-Load Dynamics

Squat movements generate the highest loads in any commercial facility. A user may load hundreds of kilograms onto the carriage. At that level, frame mass is not a luxury. It is the only thing preventing rearward shift, torsional flex and long-term weld fatigue.

At 170 kg, the PT064G remains planted without floor anchoring. The wide base distributes load across the floor surface, which prevents rocking during explosive concentric work and controlled eccentric lowering. This allows members to apply maximum effort without subconsciously holding back to protect balance.

For operators, this stability also reduces incident reports. Members are less likely to adjust their movement to compensate for equipment behavior, which keeps the squat arc consistent and reduces lower-back strain.

The 1900 × 1250 × 1080 mm Package

The packaged dimensions are 1900 mm long, 1250 mm wide and 1080 mm high. These measurements reflect the heavy commercial construction of the PT064G.

The 1080 mm height prevents casual double stacking in most standard warehouse configurations. The package should be handled as a single unit using a forklift or pallet jack. The 1900 mm length and 1250 mm width require careful container layout, as the carton does not align neatly with a standard pallet footprint.

Distributors should request a formal container load plan before confirming order quantities. The 170 kg net weight and 1080 mm package height make volumetric efficiency less favorable than compact machines, but the freight cost per kilogram remains reasonable because the frame density is high.

Why a Guided Squat Machine Outperforms a Rack for Most Members

The barbell back squat is highly effective, but it requires shoulder mobility, thoracic extension, balance and confidence under load. Many members never develop these qualities, which limits their access to serious leg training.

A guided squat machine removes the bar-positioning problem while preserving the loading principle. Members can use heavy resistance safely, progress systematically and develop the strength that later supports barbell training if they choose to pursue it. The shoulder and hand supports shown in the product image keep the upper body in position throughout the movement.

Plate-Loaded Construction Versus Selectorized Alternatives

Selectorized squat machines offer clean aesthetics and simple operation, but they introduce a fixed resistance curve and weight increments determined by the stack. The PT064G uses plate loading, which gives users direct control over resistance.

Across competing commercial squat machines, wholesale pricing spans a wide range. Basic plate-loaded hack squat and leg press stations start near the lower hundreds of dollars per unit. Mid-range guided machines occupy a stronger price tier, and premium commercial leg presses with enclosed weight stacks reach several thousand dollars. The PT064G competes in the professional plate-loaded segment, where frame stability and movement quality are the deciding factors.

Footplate Geometry and Muscular Emphasis

The product image shows an integrated footplate and linkage system. Foot placement on this surface determines which muscles perform the work.

A narrow stance with the feet low on the plate emphasizes the quadriceps. A wider stance with the feet higher shifts emphasis toward the glutes and hamstrings. This degree of variation is one of the main reasons experienced members prefer plate-loaded leg machines over fixed-path alternatives.

These are training guidelines rather than factory specifications. Actual emphasis depends on the exact carriage angle, available range of motion and individual hip anatomy.

Training Applications

The exact movement path and available range of motion should be confirmed against the factory specification sheet. Some squat machines emphasize a vertical squat pattern, while others follow a more horizontal leg press arc. The product image indicates a guided linkage design, but the precise angle determines which training protocols are appropriate.

Red Loading Linkages as a Commercial Signal

The product image shows red round weight plates and red linkage arms against a black frame. This combination communicates strength and performance without relying on colored upholstery.

Black frames are the default specification in most commercial facilities because they hide chalk dust and surface wear better than lighter colors. Red loading components create a strong visual accent and signal that the machine belongs to a serious strength line. For distributors, this neutral-but-strong aesthetic makes the PT064G easy to integrate with existing equipment from other ranges.

Powder coating is the expected finish for this category. It resists chipping at contact points and handles humidity better than wet paint. For suppliers exporting to coastal markets, coating thickness and pretreatment should be confirmed during the specification stage.

Why Squat Machines Belong in Every Commercial Facility

The squat pattern is one of the most effective lower-body movements available, but it also requires the most technical skill. A barbell back squat demands shoulder mobility, balance and confidence under load. Many members never develop these qualities, which limits their access to serious leg training.

A guided squat machine removes the bar-positioning problem while preserving the loading principle. Members can use heavy resistance safely, progress systematically and develop the strength that later supports barbell training. This broadens the member base that can use the equipment and improves overall facility utilization.

Programming the PT064G

Squat training responds well to varied repetition ranges. Heavier sets with lower repetitions build foundational strength. Moderate sets develop muscle mass. Higher repetitions improve endurance and conditioning.

A typical approach uses the PT064G once or twice per week as part of a lower-body session. One session may use a heavy load for 5 to 8 repetitions. Another may use a moderate load for 10 to 15 repetitions with slow tempo and a deliberate pause at the bottom of the movement.

These ranges are training guidelines rather than factory specifications. Actual load depends on the plate system supplied and the user’s training history.

Frequently Asked Questions

Is the PT064G a commercial machine?

Yes. The 170 kg steel frame, 1650 × 2000 × 1600 mm footprint and plate-loaded resistance system place it in the professional strength equipment category.

What does the product image show?

The image shows the black steel frame and base, the red linkage arms, the shoulder and hand supports, the footplate and the plate-loading system. Final included accessories should be confirmed with the commercial quotation.

How much clearance is needed?

A practical planning envelope is approximately 2.7 m in depth and 3.3 m in width. The 1600 mm height should be checked against ceiling restrictions with at least 300 mm of additional clearance.

Can the machine be rebranded?

Yes. The frame is presented without prominent decorative branding, leaving space for distributor logos, custom frame colors and private-label packaging.

Does it require floor anchoring?

No. The 170 kg frame remains stable under normal use without permanent fixing. This is useful in leased facilities and hotel installations.

How does it differ from a standard power rack?

A power rack requires the user to position and unrack a barbell. The PT064G provides a guided movement path with integrated shoulder supports, which is more accessible for members without advanced barbell technique.

Is the movement path adjustable?

The product image and specification identify this as a squat machine. Whether the carriage angle or footplate is adjustable should be confirmed against the factory specification sheet.

Can it be included in a full equipment package?

Yes. It is commonly combined with a leg extension, a seated leg curl, a hip trainer and a calf trainer to form a complete lower-body strength circuit.

What is the advantage over a selectorized leg press?

A plate-loaded machine allows direct load selection and uses the same plate inventory as the rest of the strength floor. It also avoids the cable and guide-rod maintenance associated with selectorized equipment.

Can it be shipped in a 20-foot container?

Yes, but exact unit count depends on carton orientation. The 1900 × 1250 × 1080 mm package dimensions require specific layout planning, and the supplier should provide a container load plan before booking.

Procurement Recommendations

Buyers evaluating the PT064G against competing units should focus on four areas: pivot bearing quality, base steel thickness, weld reinforcement at the carriage and guide construction. Squat machines operate under the heaviest loads in the facility and experience both compressive and torsional force.

A supplier should provide a specification sheet covering these elements. Price comparisons are only meaningful when frame weight, package dimensions and bearing type are identical. A lower quotation based on thinner steel or lighter packaging will produce a machine that shifts under load and arrives with transit damage.

For distributors, the PT064G works best as a flagship lower-body product. It pairs naturally with a leg extension, a seated leg curl, a hip trainer and a calf trainer to form a complete leg zone. The 170 kg frame and commercial black-and-red finish support a strong retail price position, while the plate-loaded format avoids the maintenance commitments of cable and stack systems.